Save up to $2,200 on a new residential tankless install · Members get priority same/next-day service
Leon Plumbing company logo

Tankless · Burbank

Rinnai Tankless Model Selection & Sizing in Burbank

The right Rinnai tankless system depends on simultaneous hot-water demand, incoming water temperature, and your home’s installation constraints. Here’s how Burbank homeowners can narrow the options without relying on bathroom count alone.

By Sev Leon, Leon Plumbing

Published · Updated No recorded revisions

Which Rinnai tankless system fits your Burbank home?

Choose a Rinnai model by matching simultaneous hot-water demand to its documented output at your required temperature rise, then verify installation compatibility. Bathroom count is a starting point—not a complete sizing calculation.

Rinnai’s official Solution Selector asks about bathrooms, individual shower heads and sprays, water-using fixtures, energy source, installation location, and ZIP code. Those inputs help narrow the options, but a final recommendation needs an onsite assessment and the exact model’s performance documentation.

Leon Plumbing has served Southern California since 1983, with CSLB Lic. C-36 #474827. For homeowners comparing Rinnai options, our tankless service in Burbank starts with the household’s actual needs rather than a one-size-fits-all recommendation.

Burbank installation factors that affect selection

Hard water and seasonal temperatures

Hard water can contribute to scale accumulation inside a tankless heat exchanger. Don’t assume a particular hardness level at your address: review available water-quality information and have onsite conditions evaluated when planning maintenance or treatment.

Burbank’s generally mild climate does not eliminate seasonal changes in incoming water temperature. Sizing should account for cooler supply conditions, not just summer performance. Outdoor placement also requires checking the selected model’s environmental limitations and protection requirements.

Older homes and permits

An older Burbank home may have a convenient heater location but unsuitable existing infrastructure. Gas supply capacity, electrical provisions, piping condition, vent routing, and service access can affect the project more than the heater’s advertised capacity.

Confirm applicable permit and inspection requirements with the City of Burbank before installation. Moving equipment, changing venting, or modifying utilities can expand the scope. Don’t assume replacing an existing heater makes the installation permit-exempt.

Rinnai model selection and sizing, step by step

1. Map simultaneous demand

List the fixtures likely to run together: showers, kitchen faucets, laundry, and other hot-water uses. Include anticipated additions such as another bathroom.

Rinnai specifically says to count each shower head or body spray—not merely each shower. A multi-outlet shower can change the demand calculation significantly. Your plumber should evaluate fixture flow and hot-water requirements rather than simply adding bathroom counts.

2. Establish the required temperature rise

Temperature rise is the difference between incoming water temperature and the required heater outlet temperature. A tankless heater’s available flow depends on that rise.

Ask for the proposed model’s performance chart and the conditions used in the calculation. A maximum flow figure without its associated temperature rise is not enough to establish whole-home suitability.

3. Narrow the Rinnai family

The supplied Rinnai page lists these product families. It does not provide their individual sizing curves or installation requirements.

Rinnai categoryFamilies listed by RinnaiWhat to verify before selection
CondensingRX, RXP, RUS, RUCSExact-model output, venting, condensate provisions, and placement requirements
Non-condensingRE, REP, VExact-model output, approved venting, and placement requirements

This is a starting list, not a ranking. Features, fuel compatibility, recirculation support, and installation configurations must be confirmed in current documentation for the complete model number.

4. Check installation feasibility

A licensed professional should assess fuel supply, electrical requirements, water pressure, mounting location, clearances, vent termination, and any required condensate disposal. An existing tank-style heater’s connections do not automatically support a tankless replacement.

Gas sizing, electrical alterations, combustion checks, and vent installation are technician-only work—not homeowner setup tasks.

5. Separate capacity from delivery time

A larger heater does not automatically make hot water reach a distant bathroom faster. Pipe length and distribution layout affect the wait.

If faster delivery matters, ask whether the proposed Rinnai model supports an appropriate recirculation arrangement and what additional components or plumbing it requires. Verify compatibility rather than assuming every family includes the same features.

6. Request a documented recommendation

The proposal should identify the exact model, sizing assumptions, installation scope, permit responsibility, and maintenance access. Ask the installer to identify the applicable Rinnai manual and performance chart before you approve equipment.

Warning signs: sizing problem or service issue?

Reduced hot-water performance when several fixtures run may indicate excess demand, but it does not prove the heater is undersized. Temperature fluctuations, interruptions, unusual operating sounds, or recurring display messages also warrant evaluation.

Safe homeowner observations: note which fixtures were operating, photograph the display, record the model number from an accessible label, and gather maintenance records. Do not remove equipment covers.

Professional diagnosis: checking supply conditions, scale-related restrictions, combustion, sensors, and venting requires qualified service. Don’t replace the heater with a larger unit before identifying the cause.

No error-code meanings or model-specific maintenance intervals are supplied in the cited excerpt. Use Rinnai’s Product Document Library, referenced on its website, to locate the exact model manual. Arrange professional diagnosis rather than applying another model’s code explanation or flushing procedure.

Warranty, code, and choosing your installer

Ask for the proposed model’s current written warranty. Verify installation conditions, maintenance obligations, coverage exclusions, and whether labor is included; do not assume one warranty applies across all Rinnai families.

Choose a professional whose license status you can verify through California’s CSLB. Request a written scope covering permits, commissioning, and manufacturer-required installation details. Brand certification is a separate claim that should be verified—not inferred from a contractor’s license.

Frequently asked questions

Can I size a Rinnai heater by bathroom count?

Not reliably. Bathroom count helps start the selection process, but simultaneous fixture demand and temperature rise determine the required output.

Is the largest Rinnai model always best?

No. Select documented capacity that fits your demand and installation conditions. Buying extra capacity does not resolve distribution delays or infrastructure limitations.

Does hard water require maintenance every year?

Do not assume a universal interval. Follow the exact model’s maintenance instructions and have a professional account for water quality and usage.

What should I ask a Rinnai tankless plumber in Burbank?

Ask for the exact model, supporting sizing chart, infrastructure assessment, permit plan, and written warranty information—not just an equipment recommendation.

Plan your Rinnai installation

Searching for “Rinnai tankless near me”? Call Leon Plumbing at (818) 326-0780 or book online. Visit our service page—the tankless water heater services page—and explore the Advantage membership for membership details.

Sources

  • Rinnai Solution Selector: selection questions and listed product families. The supplied excerpt does not establish exact-model specifications, warranty terms, error codes, or maintenance requirements.

Related posts

Need help in Burbank?

Leon Plumbing Advantage

Pay less for every plumbing visit — for $34.99/mo.

  • Free $149 whole-home inspection
  • 10% off all repairs & labor
  • 2-year workmanship warranty
  • 50% off after-hours premium
  • 12-month rate lock
  • Online account with job photos & records

$34.99/month

12-month membership · rate locked

Become a Member