Save up to $2,200 on a new residential tankless install · Members get priority same/next-day service
Leon Plumbing company logo

Tankless · Tujunga

Rinnai Tank-to-Tankless Conversion & Replacement Tujunga

Replacing a storage tank with a Rinnai tankless water heater takes more than swapping equipment. Learn what Tujunga homeowners should check for sizing, installation, repairs, and ongoing maintenance.

By Sev Leon, Leon Plumbing

Published · Updated No recorded revisions

Considering a Rinnai tank-to-tankless conversion or replacement in Tujunga? Start with the installation requirements—not just the heater. Gas supply, venting, water quality, and household demand determine whether the system will perform as expected.

Leon Plumbing has served Southern California since 1983 and holds California plumbing contractor license CSLB C-36 #474827. Here is what homeowners should understand before converting a storage-tank system or replacing an existing tankless unit.

Tujunga conditions that affect the project

Tujunga’s foothill setting makes installation location important. Mild weather does not eliminate freezing conditions at exposed piping. An outdoor installation needs a model approved for that location and protection appropriate to the manufacturer’s instructions. Built-in freeze protection has operating limitations and does not necessarily protect connected pipes.

In older homes, existing gas piping, aging water lines, limited electrical access, and older vent routes can complicate a conversion. A tankless heater’s smaller cabinet does not automatically make the old tank location suitable.

Hard water is another planning issue. Mineral scale can restrict heat transfer and flow. Rather than assume a neighborhood-wide hardness level, check the property’s water quality and compare it with the selected Rinnai model’s requirements.

Tujunga is within the City of Los Angeles. Plan for applicable permits and inspection through the Los Angeles Department of Building and Safety; confirm the current requirements for the exact project before work begins.

Installation assessment: sizing and site readiness

What size Rinnai tankless heater do you need?

Size for simultaneous hot-water demand at the required temperature rise, not simply bedroom count or the old tank’s gallon capacity. A plumber should evaluate:

  • Fixtures likely to run together, including showers and laundry.
  • Actual fixture flow rates and incoming water temperature.
  • The model’s capacity at the required temperature rise.
  • Gas supply, meter capacity, piping length, and other connected appliances.
  • Whether recirculation is needed and compatible with the plumbing layout.

Tankless operation does not mean instantaneous hot water at every faucet. Water already sitting in the distribution piping still has to move unless an appropriately designed recirculation arrangement addresses that delay.

How should you prepare for an assessment?

Clear safe access to the existing heater and gas meter. Gather the model number, installation age, service records, and photos of any visible leaks. Note which fixtures lose hot water and whether the problem occurs during simultaneous use. Do not remove covers, disconnect venting, or adjust gas components.

Conversion and replacement, step by step

1. Define the scope

A tank-to-tankless conversion introduces a different heating system. Replacing an existing Rinnai tankless heater may be simpler, but old gas connections, venting, and accessories still require compatibility checks.

2. Select equipment and plan approvals

Choose a model based on demand, installation location, fuel type, and infrastructure. Establish the permit responsibilities, installation details, and inspection process before removing the old heater.

3. Prepare utilities and venting

The installer verifies gas capacity and makes any necessary piping changes. Electrical requirements must also be addressed. Indoor combustion equipment needs a manufacturer-approved venting arrangement with compliant termination clearances; an old tank heater’s vent cannot simply be assumed reusable.

4. Install water connections and drainage

Mount the heater securely and connect the water piping. Include appropriate service access, isolation valves, and required pressure-relief provisions. Condensing models also need an approved condensate disposal arrangement, with neutralization where required by the installation instructions or local conditions.

5. Commission and inspect

The professional checks for leaks, verifies operating conditions according to the installation manual, and tests hot-water delivery under realistic demand. Complete required inspections and review controls, maintenance access, and warranty paperwork with the homeowner.

Repair versus replacement: warning signs

Temperature swings, repeated shutdowns, reduced hot-water flow, unusual operating sounds, or recurring leaks warrant diagnosis. These symptoms do not automatically mean the heater needs replacement: scale, supply restrictions, fixture problems, or installation defects can produce similar complaints.

Repair may make sense when the fault is isolated, parts are available, and the installation is otherwise sound. Replacement deserves consideration when there is significant deterioration, repeated major failure, unavailable parts, or a mismatch between capacity and household needs. Ask for the diagnosis and both options in writing.

If you smell gas, leave the area without operating switches or creating sparks. Contact the gas utility or emergency services from a safe location. A carbon monoxide alarm also requires immediate evacuation and emergency assistance. Do not attempt combustion or gas repairs yourself.

Maintenance scope: separate from installation and repairs

Routine maintenance is preventive work, not a substitute for diagnosing a malfunction. Its scope may include checking inlet filters, inspecting accessible connections and vent terminations, and descaling the heat exchanger when indicated by water quality and manufacturer guidance.

Follow the exact model’s maintenance instructions rather than assuming one universal flushing interval. Homeowners can keep access clear, document symptoms, and look for visible leaks without dismantling equipment. Have a qualified professional handle internal servicing, gas adjustments, and unresolved operating faults.

Warranty, code, and choosing a licensed plumber

Rinnai warranty terms vary by model and application. Review the actual warranty for coverage periods, exclusions, labor provisions, and documentation requirements. Do not assume damage related to scale or an improper installation is covered.

When searching for a “Rinnai tankless plumber Tujunga” or “Rinnai tankless near me,” verify the contractor’s active CSLB license and insurance. Request a written scope covering permits, gas work, venting, condensate, commissioning, and disposal. A plumbing license should not be confused with manufacturer certification.

Avoid budgeting around an unverified rebate. ENERGY STAR’s incentive database directs eligibility questions to program sponsors. LADWP’s referenced electrification page mentions heat pump water heater rebates; that is not evidence of a rebate for a Rinnai gas tankless installation.

Frequently asked questions

Can my existing gas line stay?

Possibly. Its capacity must be checked against the selected heater and all other connected gas loads.

Can a tankless unit use my old tank vent?

Not automatically. Vent materials, sizing, routing, and termination must satisfy the selected model’s instructions and applicable code.

Will one heater run two showers?

That depends on shower flow rates, incoming water temperature, and the model’s output at the required temperature rise.

Should I flush the heater before a service visit?

Not unless instructed. Record symptoms and provide clear access; flushing first may obscure useful diagnostic information.

Plan your Tujunga project

Call (818) 326-0780 or book online with Leon Plumbing. Visit our tankless water heater services page for service information, and explore the Advantage membership for membership details.

Sources

Related posts

Need help in Tujunga?

Leon Plumbing Advantage

Pay less for every plumbing visit — for $34.99/mo.

  • Free $149 whole-home inspection
  • 10% off all repairs & labor
  • 2-year workmanship warranty
  • 50% off after-hours premium
  • 12-month rate lock
  • Online account with job photos & records

$34.99/month

12-month membership · rate locked

Become a Member